Paca Series Drive Systems

• Capacity -1,000 lbs.
• Cab Size – maximum of 15 sq. ft.
• Travel – up to 50 ft.
• Stops – up to 5 stops
• Nominal Speed – 40 feet per minute
• Guide Rail – (2) 3/16″ J-channel steel
• Pit Depth – 8″ minimum required
• *Overhead – See dealer

Controls – Fully automatic at car and landings, car light switch with auto light time out, emergency light and in-use indicator at landings. Field programmable homing feature, modular car wiring and digitally addressed hoistway wiring.

Signal Systems – Wall mount phone jack and emergency alarm.

Electric Supply – 230 volts, single phase, 60 hertz with 3-pole disconnect switch. A separate 120-volt circuit is required for cab lighting.

*Emergency Lowering – Automatic descent with backup power supply. Manual hand wheel standard on Paca-Glide and Paca-Lift.

*Drive – Variable speed frequency control, for controlled acceleration and deceleration.

Slack Cable/Broken Rope – Twin instantaneous, broken and slack cable applied by retained compression spring.

Car – Frameless car with accordion gate standard. standard collection and custom raised panel designs are available on all Paca Series elevators.

*Controller Location – Remote location outside of hoistway, locked control box.

Additional Options are available, for details contact your local dealer.