Excelevator Drive Systems

• *Capacity – 1,000 lbs.
• Cab Size – maximum of 15 sq. ft.
• Travel – up to 50 ft.
• Stops – up to 6 stops
• Nominal Speed – 40 feet per minute
• Guide Rail – 8# T-Rail Pit
• Depth – 10″ minimum required
• *Overhead – see dealer

Controls – Fully automatic at car and landings, car light switch with auto light time out, emergency light and in-use indicator at landings. Field programmable homing feature and modular car wiring and digitally addressed hoistway wiring.

Signal Systems – Wall mount phone jack and emergency alarm.

Electric Supply – 230 volts, 25 amp, single phase. A separate 120 volt circuit is required for cab lights. *Emergency Lowering on RMR and MRL – Manual operation is standard, battery powered emergency lowering is optional.

*Drive – Variable speed frequency control, for controlled acceleration and deceleration.

Slack Cable/Broken Rope – Twin instantaneous, broken and slack cable applied by retained compression spring.

Car – Frameless car with accordion gate standard. Standard collection and custom raised panel designs are available on all Excelevator elevators.

*Controller Location – Remote location outside of hoistway, locked control box.

Additional Options are available, for details contact your local dealer.